The PulseTech Xtreme Charge® XC400 (Model: 200X010) is a 12V 4 Amp conditioning and maintenance charger designed to extend the life and improve the performance of all types of 12V lead-acid batteries. This device utilizes patented Pulse Technology to minimize the size of damaging lead sulfate crystals, thereby increasing the duty and life cycles of batteries by up to three times.
Function Description:
The XC400 operates through a multi-stage charging process that includes evaluation, desulfation, bulk charging, and maintenance.
- Evaluation (TEST): Upon initial connection, the Xtreme Charge® evaluates the battery's current capacity and condition. This step determines the appropriate charge rate and includes a "Bad Battery" indication if the battery is faulty and cannot be recharged. The red "Test" LED illuminates during this phase.
- Desulfation: The patented PULSE conditioning minimizes lead sulfate crystal size, enhancing battery performance and life cycles. This is a continuous process integrated throughout the charging cycle.
- Charging (BULK Charge): A proprietary microprocessor-controlled integrated charging process measures both voltage and current, applying only the amount of charge the battery can accept at any given time. The XC400 has a bulk charge capability of 4 Amps, allowing it to rapidly and safely recharge discharged batteries. The green "Charging" light indicates this phase.
- Conditioning (PULSING): As the battery conditions, three green "Pulsing" LEDs light sequentially. This patented Pulse Technology enables the battery to accept and maintain its maximum charge.
- Maintenance (Float Charge): Once fully charged, the green "100%" light illuminates, and the "Charging" light turns off, indicating the charger is providing a float charge. The XC400 can be left connected indefinitely to maintain the battery at its proper operating voltage and peak condition, preventing overcharging and extending its operating life.
Important Technical Specifications:
- Input Voltage: 120VAC
- Maximum Charge Current: 4 Amps
- Nominal Float Voltage: 13.6 V
- Maximum Bulk Charge Voltage: 14.8 V
- Pulse Frequency: 40-50 kHz
- Functional Output Cable Length: 8 feet
- Dimensions: 7.15" L x 3.62" W x 1.96" H
- Warranty: 5-Year Limited Warranty
Usage Features:
- Easy Connection: Connect the red battery clip to the positive (+) battery post and the black battery clip to the negative (-) battery post.
- Plug-and-Play: Once battery cables are connected, plug the Xtreme Charge® into a 120V AC power source to begin the charging process.
- Status Indicators:
- Green "On" light: Indicates the charger is receiving AC input.
- Red "Test" LED: Illuminates during the initial battery evaluation phase.
- Green "Charging" light: Indicates the charger is providing a bulk charge.
- Sequential Green "Pulsing" LEDs: Indicate the battery is being conditioned by Pulse Technology.
- Battery State of Charge LEDs (25%, 50%, 75%, 100%): Illuminate during the "Test" cycle to show the battery's state of charge. The green "100%" light illuminates when the battery is fully charged.
- Fault Indicators:
- Red "No Connection" light: Indicates the charger is not connected to the battery, or the inline fuse on the positive battery lead needs replacement.
- All lights flash on and off: Indicates battery clamps are connected in reverse.
- Red "Bad Battery" LED: Illuminates if the battery is below 7-Volts (during "Test" cycle) or if the battery has been pulsing and charging for 24 hours continuously without reaching 100% state of charge, indicating a non-rechargeable battery.
- Versatility: Ideal for AGM and Maintenance-Free batteries, suitable for any type of 12V lead-acid battery.
Maintenance Features:
- Patented Pulse Technology: The core maintenance feature, it actively inhibits and removes sulfation, which is a primary cause of battery degradation. This process protects the battery from overcharging and significantly extends its operating life.
- Float Charge Capability: The charger can be left connected indefinitely to maintain batteries at their optimal operating voltage, ensuring they remain in peak condition.
- Fuse-Protected Cables: The included battery clamps and lugs are fuse-protected, adding a layer of safety during operation.
Accessories:
The Xtreme Charge® XC400 package includes the charger with fuse-protected quick-disconnect battery clamps and lugs, an Important Safety Instructions booklet, and a Feature and Use Guide. Additional accessories available for purchase include:
- QuadLink™ 4-Channel Battery Charger Multiplier (Model: XC-QL4, Part #: 100X004): Converts any 6/12V battery charger with a standard SAE 2-prong output connector into a 4-station maintenance charger.
- Battery Lead with Clips (Model: XC-CLIPS, Part #: 100X827): A 7.5-amp fuse-protected cable with a quick-disconnect terminal, 2 feet long.
- "Leave-On" Battery Lead with Lugs (Model: XC-LUGS, Part #: 100X830): A 7.5-amp fuse-protected cable with a quick-disconnect terminal, 2 feet long, designed for permanent connection to battery terminals.
- 5' Extension Lead (Model: XC-EXT-5, Part #: 100X805): Extends a standard lead by 5 feet with quick-disconnect terminals on both ends.
- 25' Extension Lead (Model: XC-EXT-25, Part #: 100X825): Extends a standard lead by 25 feet with quick-disconnect terminals on both ends.
- Quick Battery Tester (Model: XC-822-TEST, Part #: 100X822): A pocket-sized tester to quickly assess a 12V battery's state of charge.
Need help?
General
To Next Page
