Model XC400 Feature and User Guide
Table of Contents
Features ...........................................................................................................................1
User Guide ...................................................................................................................1 - 2
Pulse Technology .............................................................................................................2
Specifications ..................................................................................................................2
5-Year Limited Warranty ...................................................................................................3
Products and Accessories ...............................................................................................3
Features
Pulse Patented Pulse Technology increases the duty and life cycles of all 12 volt bat-
teries by up to three times.
Desulfate The unique application of patented PULSE conditioning provided by PulseTech
®
Products increases performance and life cycles of any size or type of 12V
lead-acid battery by minimizing the size of damaging lead sulfate crystals.
Test Xtreme Charge
®
evaluates the battery during initial connection and tests it
continually to determine the appropriate charge rate based on your battery’s
current capacity and condition. This TEST step also includes a “Bad Battery”
indication if it determines the battery is faulty and cannot be re-charged.
Charge A proprietary microprocessor controlled integrated charging process measures
both voltage and current and applies only the amount of charge your battery is
able to accept at any given time. As the patented pulse technology is applied in
combination with the saturation charge the battery’s condition improves. This
proprietary process inhibits and removes sulfation, protects your battery from
overcharging and extends its operating life.
Charge The XC400 is also designed to be a MAINTENANCE charger for any type of 12V
lead-acid battery. Through application of our proprietary charge algorithms and
high frequency pulsing processes, your battery is maintained safely at its prop-
er operating voltage indenitely. If the charger is connected to a discharged
battery, its BULK charge capability (4 Amp) will re-charge the battery rapidly
and safely so it can be put back into service quickly.
User Guide
Do not operate without first reading the Important Safety Instructions.
Connect red battery clip to positive (+) battery post. Then connect black battery clip to
negative (-) battery post.
Once you’ve connected the battery cables properly, you can begin the charging process.
Plug Xtreme Charge
®
into 120V AC power source.
TEST
Green “On” light illuminates, indicating charger is receiving prop-
er AC input. If it’s connected to battery correctly, red “Test” LED
lights, indicating unit is testing battery’s condition.
1
To Next Page
Loading...
