EasyManuals Logo

PURE CHRONOS II User Manual

PURE CHRONOS II
18 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
10
Options
Press Menu to access the following options. Use +/− and Select to adjust options.
Options available in DAB
Intellitext options (Menu > Intellitext > Options)
Set timeout
Choose to delete old Intellitext data after 1 week (default) or 1 day.
Clear all
Delete all stored Intellitext data immediately.
DRC value (Menu > DRC value)
DRC (Dynamic Range Control) value makes the quieter sounds in a DAB broadcast easier to hear
at low volume or in a noisy environment. Check with the broadcasters to find out if they use DRC.
DRC full Applies the DRC level as sent with the broadcast.
DRC half DRC level is set to half that sent with the broadcast.
DRC off Any DRC level broadcast will be ignored.
Station order (Menu > Station order)
Alphanumeric Lists all stations in alphanumeric order.
Active station Lists active stations first on the station list.
Multiplex Lists stations in groups according to their multiplex.
Trim stn. list Removes inactive stations (see page 12).
Autotune (Menu > Autotune)
Scans all DAB Band III and L-Band frequencies for stations and automatically adds any new
stations found to the station list. This may take a few minutes. To stop an Autotune press Select.
Options available in DAB > Options available in FM > General options
Options

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the PURE CHRONOS II and is the answer not in the manual?

PURE CHRONOS II Specifications

General IconGeneral
RMS rated power1.7 W
Radio typeClock
Tuner typeDigital
FM band range87.5 - 108 MHz
Supported radio bandsDAB
Radio Data System (RDS)Yes
Preset stations quantity20
Number of built-in speakers1
Display typeLCD
Product colorSilver
Headphone connectivity3.5 mm
Outputstereo
I/O ports1 x Mini USB
Dimensions (WxDxH)170 x 190 x 60 mm
Power requirements230V AC
Power consumption (standby)0.99 W
Power consumption (typical)2.02 W

Related product manuals