PURE CHRONOS II User Manual

6
Setting alarms
Alarm menu overview
Setting an alarm
Chronos II has four alarms which you can set to sound at different times as either DAB, FM or
tone alarms. DAB and FM alarms switch your radio on (if in standby) and tune to the station you
last listened to or a station of your choice from the preset list; tone alarms sound an alarm tone.
1. Press the Alarm button and choose Alarm 1, 2, 3 or 4 with +/− and Select.
2. Select ‘Set alarm’ and choose ‘On’ to turn the alarm on.
3. The default time is 7:00am. To change this, select ‘Set time’ to set the time you want the alarm
to sound. Adjust the hours using +/− and press Select to confirm, then repeat to adjust the
minutes.
Alarm menu overview > Setting an alarm > Changing an alarm that you have set
Setting alarms
Set alarm
On
Off
Set time
Hours
Minutes
Set days
Daily
Weekday
Weekend
Saturday
Sunday
Once only
Set mode
DAB
FM
Tone
(DAB & FM only)
Alarm volume
Vol 1-20
Alarm 1/2/3/4/ Snooze time
(DAB & FM only)
Set station
Last tuned
Preset 01
Preset 02...
08:00 Set hour
07:00
08:30 Set mins
07:00
07:00 Daily
Alarm 1 Off
Off
Set alarm
Off
On

PURE CHRONOS II Specifications

General

RMS rated power	1.7 W
Radio type	Clock
Tuner type	Digital
FM band range	87.5 - 108 MHz
Supported radio bands	DAB
Radio Data System (RDS)	Yes
Preset stations quantity	20
Number of built-in speakers	1
Display type	LCD
Product color	Silver
Headphone connectivity	3.5 mm
Output	stereo
I/O ports	1 x Mini USB
Dimensions (WxDxH)	170 x 190 x 60 mm
Power requirements	230V AC
Power consumption (standby)	0.99 W
Power consumption (typical)	2.02 W