14
FM settings
These settings are only available when listening to FM radio. Tap Options, then select FM settings.
FM tuning
Switch between Seek tune and Manual tune.
Seek tune Automatically tunes to the next station with a strong signal.
Manual tune Tunes up or down in steps of 0.5MHz.
FM stereo
Switch between receiving FM stations in Mono or Stereo (default).
FM settings
FM tuning
FM stereo
This setting is only available when listening to digital radio. Tap Options, then select Autotune.
This searches for new digital radio stations and removes inactive stations. For the best results,
extend the aerial. You can stop an autotune before it has finished by tapping Cancel. When an
autotune has finished Contour will tune to the last station you listened to.
Autotune
FM settings
To Next Page
Loading...
