PURE Move 2520 User Manual

6
Getting started
Insert the ChargePAK
1. Press plastic catch on rear and slide the rear cover and lift off as
shown.
2. Insert ChargePAK M1. It can only be inserted one way, with the
ChargePAK logo facing up.
3. Once ChargePAK M1 is securely inserted, place the rear cover
back on. Press down slightly near the catch while sliding the cover
back on.
Note: Before using Move for the first time, we recommend that you
charge it for at least 3 hours.
Remove ChargePAK M1 if you are storing Move unused for a long
period.
Under normal circumstances your ChargePAK M1 will give you
years of trouble-free use, but as with all rechargeable batteries its
performance will gradually reduce with age. To replace it, visit your
local Pure dealer or buy direct from www.pure.com.

PURE Move 2520 Specifications

General

Tuner type	Analog & digital
Supported radio bands	DAB, DAB+, DMB, FM
Radio Data System (RDS)	Yes
Preset stations quantity	20
RMS rated power	- W
Built-in speaker(s)	No
Headphone outputs	1
USB connector type	Micro-USB
Headphone connectivity	3.5 mm
Volume control	Digital
Apple docking compatibility	Not supported
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Battery capacity	1000 mAh
Battery life (max)	15 h

Weight and Dimensions

Depth	15 mm
Width	56 mm
Height	102 mm
Weight	105 g