PURE Move 400D User Manual

9
Using the alarm
The alarm in Move switches the radio on (if in standby) and tunes to a
digital or FM radio station or sounds a tone.
Setting an alarm
1. Press Menu.
2. Scroll < > to ‘Alarm’ and press Select.
3. Scroll < > to ‘On’ and press Select.
4. Scroll < > to set the hour for the alarm and press Select. Repeat
to set the minute for the alarm.
5. Scroll < > to specify one of the following alarm repeat options:
‘Daily’, ‘Weekdays’, ‘Weekends’ or ‘Once’ and press Select to
confirm.
6. Scroll < > to specify ‘FM’, ‘Digital radio’, or ‘Tone’ and press
Select to confirm. If you are specifying a tone alarm, skip to step 9
.
7. Scroll < > to specify which station should be played when the
alarm goes off. You have the option of selecting one of your preset
stations or you can select ‘Last Used’ to select the station that you
were last listening to. Press Select to confirm.
8. Use Volume + / - or < > to set the volume that the radio will play
at when the alarm sounds and press Select to confirm.
9. The alarm icon will appear on the display to show that the alarm is
set.
DR
ST
FM
Alarm
DR
ST
1Xtra - BBC
Bringing you
DR
ST

PURE Move 400D Specifications

General

Radio type	Portable
Tuner type	Digital
FM band range	87.5 - 108 MHz
PLL synthesizer	-
Supported radio bands	DAB, DAB+, DMB, FM
Preset stations quantity	20
RMS rated power	- W
Display type	LCD
Display digits	32 digits
Backlight color	Orange
Wi-Fi	No
Headphone outputs	1
Headphone connectivity	3.5 mm
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Product color	White
Compatible products	iPod
Input voltage	230 V
Power requirements	5V, 800mA
Apple docking compatibility	Not supported
Battery life (max)	60 h

Weight and Dimensions

Depth	27 mm
Width	150 mm
Height	85 mm
Weight	300 g