PURE One Mi Series 2 User Manual

13
Installing a ChargePAK A1
1. Switch One Mi off and disconnect from the mains power supply.
2. Open the battery compartment (A).
3. Place the ChargePAK in the right hand end of the compartment,
logo side out (B).
3. Slide the ChargePAK to the left until it clicks into place on the
ChargePAK connector.
4. Replace the battery cover (C) and connect One Mi to the mains.
5. ChargePAK will begin charging.
Note: When charging your ChargePAK for the first time or after an
extended period of inactivity it is recommended that it is charged
for around 24 hours to ensure full battery power. If ChargePAK
is completely flat there may be a slight delay before the battery
charging indicator is displayed.
A
B
C
OneMi-S2-EN.indb 13
4/27/2012 12:42:32 PM

PURE One Mi Series 2 Specifications

General

Radio type	Portable
Tuner type	Digital
PLL synthesizer	-
Supported radio bands	DAB, FM
Preset stations quantity	16
RMS rated power	1 W
Subwoofer driver diameter (imperial)	2.5 \
Display type	LCD
Headphone outputs	1
Headphone connectivity	3.5 mm
Product color	Black
Input voltage	230, 5 V
Apple docking compatibility	Not supported
Power consumption (standby)	0.61 W
Power consumption (typical)	1.53 W
Certification	ETSI EN 300 401, C-Tick
Card reader integrated	No

Weight and Dimensions

Depth	38 mm
Width	155 mm
Height	100 mm
Weight	260 g