Type of product
Date of purchase
Name Tel
Address
If the supply cord is damaged, it must be replaced by a special cord or assembly available from
the manufacturer or its service agent.
Warranty
Caution
0
1. Do not use hot water (over 45 C)!
2. Do not freeze the machine!
3. Switch off electricity and water source if away for more than 5 days, and drain out pure water.
Operation regulation
A. With everything connected, turn on the water check for leaks.
B. Make sure the storage tank shut-off valve is "OFF". Open the sink top faucet.
C. Within a few minutes (up to 15) the water will start to run from the faucet slowly.
D. Let the water run for at least 30 minutes. This flushes the carbon filters on first time use.
E. After initial flushing, open the shut-off valve on the tank and close the sink top faucet.
F. Tank will now full of water (usually 2 to 3 hours) after the tank has filled.
Open the sink top faucet and drain all water until the storage tank is empty and there is only a small flow from the
sink top faucet. *** DO NOT USE FIRST TANK OF WATER.***
G. Close the sink top faucet. The system is now ready for use.
H. Change filters regularly every 6 to 12 months and have the membrane checked annually.
Pure-Pro Water Corporation
19636 S. 97th Ave Mokena, Illinois, U.S.A.
Tel: +1 708 479 4473 Fax: +1 708 479 4332
www.purepro.net
Pure-Pro Reverse Osmosis (RO) Systems
Over ten years expertise in reverse osmosis drinking water systems, our unique design features make
installation easier and operation more reliable, and our wide selection of colors and sizes allows you
to solve virtually any RO application.
To Previous Page
Loading...
