Puretec SOL30-E3 - Installation Procedure

10
Installation & Operation Manual Copyright © Puretec Pty Ltd 2019
Installation Procedure
Ensure Water Has Been Tested
Input values into Table on page 4 and the analysis has been inspected by Puretec.
3
Water Analysis Information
Hardness ___________ ppm / mg/L
Iron ___________ ppm / mg/L
Manganese ___________ ppm / mg/L
pH ___________
TDS (Total Dissolved Salts) ___________ ppm / mg/L
Conductivity ___________ EC / uS/cm
Chloride ___________ ppm / mg/L
Sodium ___________ ppm / mg/L
130
0.3
0.1
7
275
404
121
96
✓✓
Customer Service Helpline
1300 140 140 (AU) 0800 130 140 (NZ)
✓
Extra Items Required
2
Unpack the Equipment
Ensure all parts are present and have not been damaged in transport.
You should have:
1
User Guide
Volumetric Water Softening Appliance
SOL-E3 Series
For correct operation & installation it is essential to observe these instructions.
ATS5200.103
Licence No. WM 74593
Services
Water Soener
Drain Tube Assembly
Bypass Assembly
(purchased separately)
User Guide
⅝" Tubing high pressure for
drain and overow (refer to
page13).
Bag of Salt (refer to page
17 for the type of salt to
be used).
Installation Procedure