EasyManua.ls Logo

Puretec SOL40-E3 - Puretec Customer Service

Puretec SOL40-E3
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3
Copyright © Puretec Pty Ltd 2019 SOL-E3 User Guide
Puretec Customer Service
Thank you for purchasing a Puretec Sorol Volumetric Water Soening System. Your
system is a proven performer manufactured from only quality materials and components.
It will give years of reliability and trouble free operation if maintained properly.
This user guide is designed for Puretec SOL-E3 Water Treatment Systems. Be careful to
ensure the information and illustration is applicable to your particular unit.
Caution: Do not use with water that is microbiologically unsafe or without
adequate disinfection before or aer the system.
The systems are designed for metropolitan supply water but can be used in other
situations. For other types of water supply, please contact your local Puretec dealer.
Puretec Water Soeners are designed to run economically for many years, dependent on
the initial installation and periodic maintenance.
Flush system for 5 minutes or more, aer any period of non-use, more than 2 weeks.
Note: For point of entry installations an approved dual check backow prevention device
must be installed.
When line pressure exceeds 500 kPa, a pressure limiting valve is recommended.
Pressures above 875 kPa must have PLV must have a pressure limiting valve installed.
Note: Water soener salt not supplied.
Puretec Customer Care

Related product manuals