EasyManua.ls Logo

Purkeys 1200+ - Voltage and Load Protections; Low Battery Alarm and Waveform

Purkeys 1200+
18 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
P: 479.419.4800 | F: 479.419.4801 | www.purkeys.net
1200+ WITH TIMER V1.00
OWNERS MANUAL
4
LOW BATTERY VOLTAGE PROTECTION This condition is not harmful to the inverter but could shorten battery life.
The inverter automatically shuts down when the input voltage drops to 11.5 volts.
OVER VOLTAGE PROTECTION The inverter will automatically shut down when the input voltage exceeds 15.5 volts DC.
Input voltage exceeding 16 volts could damage the inverter.
OVERLOAD PROTECTION The inverter will automatically shut down when the continuous draw exceeds rated watts.
SHORT CIRCUIT PROTECTION This inverter will shut down. Remove the short circuit and restart the inverter.
EARTH FAULT PROTECTION This inverter complies with the standard current leakage allowance. When large current
leakage to earth terminal occurs, the protection circuit will activate and shut down the inverter, which prevents electric
shock. To restart the inverter, turn it off. Then unplug the fault AC appliance and turn the inverter back on.
LOW BATTERY ALARM An alarm will sound when the voltage from the battery pack drops to 11.0 volts. This is an
indication that the battery pack needs to be recharged or there is excessive voltage drop in the input cables. NOTE: It is
normal for the alarm to sound while the unit is being connected to or disconnected from the power source. This is not
indicative of problems.
WAVE FORM This inverter is a Modified/Quasi wave sine. Some devices like medical equipment may require a PURE
SINE WAVE inverter. Please check with us to verify.

Related product manuals