P: 479.419.4800 | F: 479.419.4801 | www.purkeys.net
1200+ WITH TIMER V1.00
OWNERS MANUAL
OPERATING ENVIRONMENT
For best operating results, the inverter should be placed on a flat surface such as a floor, wall or other solid surface. The
inverter should only be used in locations that meet the following criteria:
DRY- Do not allow water and/or other liquids to come in contact with the power inverter.
Cool-Ambient air temperature should be between 30 degrees F and 105 degree F. Do not place the inverter on or near
a heating vent or any piece of equipment that is generating heat above room temperature. Keep the power inverter
away from direct sunlight if possible.
Ventilated- Keep the area surrounding the power inverter clear to ensure free air circulation around the unit. Do not
place items on or over the power inverter during operation.
Safe- Do not use the power inverter near flammable materials or in any locations that may accumulate flammable fumes
or gasses.
Mounting- The power inverter can be operated in any position, however if mounted on a wall, mount it horizontally so
the indicators, switch, outlets and terminals blocks located on the front panel are visible and accessible.
To Next Page
Loading...