Purple Ascent Adjustable Base - Syncing Two Bases

30
SYNCING TWO BASES OPTIONAL
A Sync Cord is included with the Twin XL size base. Not
available on Queen, Full or Full-Long size bases. The Sync
Cord connects the two control boxes to a single remote for the
synchronization of two bases. This process is most commonly
used for syncing two connected Twin XL bases.
Unplug bases from power source.
Connect the Sync Cord to the Y-Cable
on each control box.
Plug bases back into the power source.
Check to ensure all cords are secure-
ly attached. Both remotes will now
operate both bases simultaneously. If
both remotes are in the middle position
of the A/B switch on the back of the
remote, both beds will operate
simultaneously.
1
2
3
4
Sync Cod
USB
USB
Y- Co  d
Y- Co  d
Contol
Box 1
Contol
Box 2
Sync Cod