27
PAIRING REMOTE CONTROL
The original remote that comes in the box is already paired
to the adjustable base. No further action is required. In the
event that the remote is not paired with the base, follow the
steps below.
Remove the back cover on the remote.
Press and hold the PAIR button on the
back of the remote. The PAIR button
will illuminate and start to ash. When
the PAIR button stops ashing, the
LED light on the control box will stop
ashing. Release the PAIR button.
Unplug the power cord from your pow-
er outlet. Wait one minute, then plug it
back in to your power outlet. Perform
Step 2 within 10 seconds, while the
control box light is ashing.
The remote is now paired. Test all
remote functions. If the remote buttons
do not impact the adjustable base
movements, please repeat the process
again or call Ergomotion
®
customer
service: 1-888-550-3746.
1
2
3
PAIR
Button
Powe Cod
Powe Supply
To Next Page
Loading...