35
TROUBLESHOOTING
If one or more functions on the bed base have stopped operating:
Check under the bed base to verify that the wired connections are secure and that there
are no cords or bedding obstructing the movement of the base.
Check to ensure the LED light is illuminated on the power supply. If there is no light,
verify that the input and power cords are properly connected.
Unplug the base for 10 minutes to reset the electronic components.
Plug bed base into a different electrical outlet, or test current outlet with another working
appliance (a grounded, electrical surge protector is recommended).
•
•
•
•
If issue is not resolved by following the instructions above, call Ergomotion
®
technical or
warranty support at: 1-888-550-3746
Ergomotion® Customer Service: US 1-888-550-3746
To Next Page
Loading...