128-9324
2 of 12
Before You Begin
PROFESSIONAL INSTALLATION IS
STRONGLY RECOMMENDED
Roll down window to avoid locking the keys in the vehicle during installation.
Avoid mounting components or routing wires near hot surfaces or near
moving parts like the steering wheel as it may prevent proper operation of the
vehicle.
Tape or loom wires under the hood and dash for protection as well
appearance.
Use grommets when routing wires through metal surfaces to prevent chafi ng
and shorting.
Use a Digital Multi Meter for testing and verifying circuits. DO NOT USE A
"TEST LIGHT" OR "COMPUTER SAFE PROBE" as these can set off air bags
or damage sensitive vehicle computers and electronics.
For technical support go to www.prestigecarsecurity.com
or call 1 800 225 6074
PATENTED: www.voxxintl.com/company/patents
Page 2
To Next Page
Loading...
