PUTCO 92009-60 User Manual

92009-60 Supplement
PT — 11/15/18 Page 1 of 3 92009-60 Supplement
Supplementary Blade Wiring Instructions
2019 Silverado LTZ Package with LED Tail Lamps
Congratulations on your purchase of a high quality PUTCO product. Should you need any application
or technical assistance, feel free to call us at: 1-800-247-3974
Monday-Friday 8:00 a.m. - 5:00 p.m. (Central Standard Time)
Additional Tools Needed:
− T15 Torx Driver
− Wire Crimpers
− Zip-Ties
Installation Instructions
1. Remove tail gate to make mounting Blade easier
2. Light bar brackets need to be 1/4” to 5/16” above metal “ridge”
to allow enough clearance between tail gate and lightbar
• Use light bar bracket to achieve proper gap between
ridge and light bar (Figure 1).
Blade lightbar Bracket
“Ridge”
Figure 1. Locating light bar with bracket
1/4” to 5/16”
gap

PUTCO 92009-60 Specifications

General

Brand	PUTCO
Model	92009-60
Category	Automobile Accessories
Language	English

Summary

Supplementary Blade Wiring Instructions

Installation Steps

Detailed instructions for mounting the Blade lightbar, including bracket placement and tailgate clearance.

Additional Tools Needed

List of necessary tools for the installation of the Blade lightbar.

Wire Connection Guide

Mapping truck wire colors to Blade wire colors for turn signals, running lights, ground, and reverse.

Final Checks and Testing

Procedures for testing functionality and ensuring proper lightbar operation before final assembly.