10
Max cool mode
• Press the “Max Cool” button on the remote control whilst in cooling mode to
utilize maximum cooling.
• In Max Cool mode, the A/C will cool regardless of the temperature.
• In Max Cool mode, the fan speed is high, and it cannot be adjusted.
Timer mode
• When the appliance is in standby mood, press the button to turn the timer on.
Press the Up and Down keys to set the timer (0~24H), and the timer indicator
will light up.
• Press the timer button to turn off the timer when the unit is on.
WATER DRAINAGE
This product is equipped with an automatic water evaporative system. The
condenser is cooled with the circulation of condensed water, which improves
cooling efficiency and saves energy.
• If the internal vessel is full of water, the display screen will
display “FL”, and the compressor will stop working automatically.
After you power off the appliance, unscrew the water cover, pull
out the water plug to drain all of the water out. Once drained, it
will restart again.
MAINTENANCE
Note: in order to avoid electric shock, please turn off the A/C and unplug the
plug before maintenance or repair
.
Cleaning
• Switch off and unplug the appliance before cleaning.
• Wipe with a soft damp cloth. Do not use chemical solvents, such as benzene,
alcohol and gasoline etc; otherwise the surface of the A/C will be damaged.
• Prevent any water from coming into contact with the A/C.
Filter
• Wash the filters every two weeks. If it is blocked by dust, the cooling efficiency
of the appliance will be reduced.
• Take out the air inlet grille and pull out the filters from both sides.
• Wash the filters in warm soapy water (neutral detergent), dry it in a shady
place once clean.
To Next Page
Loading...
