What to do if my PYE Air Conditioner does not function?
If your PYE Air Conditioner isn't working, there are several potential causes: * **No power?** Ensure the unit is connected to a functioning power outlet and switched on. * **LCD flashing FL?** Drain the water. * **Timer active?** Deactivate the Timer function.
Why does my PYE PPAC15 not seem to perform well?
If your PYE Air Conditioner isn't performing as expected, consider these possibilities: * **Direct sunlight:** Close the curtains. * **Open doors/windows or heat source:** Close doors and windows, and remove any heat sources. * **Dirty filter:** Clean or replace the filter(s). * **Blocked air flow:** Remove any blockages from the air inlet or outlet. * **Temperature setting:** Adjust the temperature if the room is cooler than the selected value.
What to do if the remote control of PYE PPAC15 does not function?
If the remote control for your PYE Air Conditioner isn't working, try the following: * **Distance:** Ensure the remote control is correctly aimed at the control panel. * **Batteries:** Replace the batteries.
General| Refrigerant | R410A |
|---|---|
| Cooling Capacity | 15000 BTU |
| Power Supply | 220-240V, 50Hz |
| Features | Remote Control, Timer, Sleep Mode |
| Operating Temperature | 16°C to 32°C |
Details temporary and permanent methods for setting up the unit.
Explains wall mounting and exhaust pipe setup for efficiency and to prevent issues.
Explains the purpose of each button and the LCD display on the control panel.
Details the buttons and their operations on the remote control for the unit.
Lists common problems, their causes, and solutions for the air conditioner.
To Next Page
