WATER DRAINAGE
This product has a self-evaporative system. The water will be recycled to cool the condenser. This not only
improves cooling efficiency, but also saves energy.
• When in Cool or Fan mode, there’s no need for water drainage.
• During dehumidifying mode, remove the drain plug from the back of the unit, then install a drain hose
(φ10mm inner dimension) and place the open end of the hose into any vessel, such as a bucket.
• If the internal water container is full, the LCD-display will flash “FL” and the unit will stop automatically.
Note: If the water full alarm is often on, the unit may malfunction. Contact a professional service centre for
help.
To Next Page
Loading...
