EasyManua.ls Logo

PYE PPAC12 - Error Detection; Fuse Parameters; Trouble-Shooting

PYE PPAC12
12 pages
Print Icon
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12
ERROR DETECTION
Error Code
Multi-functional defection
E1
Error of the coil’s temperature sensor
E2
Error of indoor temperature sensor
E4
Anti-frozen protection: temperature of the coil is too low and
the A/C is off. When the temperature increases to 8
, the
protection is released and will start to work again as normal.
FUSE PARAMETERS
Specification: Φ20mm
Voltage: 250VAC
Current: 3.15A
TROUBLE SHOOTING
Before contacting the retailer for a replacement, check the below first to see if it can solve
the problem
Problem Cause Solution
The air
conditioner does
not function.
No power supply.
Connect to power supply outlet and
switch on.
FL” flashes on the display screen Drain water.
Timer-off is running.
You can turn the unit on three minutes
later.
The air conditioner
restarts frequently
In direct sunlight. Close the curtains.
Windows or doors open, lots of
people or there is a heat source in the
room.
Close doors and windows, remove the
heat source.
Dirty filter. Clean or replace the filter(s).
Air inlet or air outlet blocked. Remove the blockage.
The unit is too
noisy
Unit stands on an uneven surface.
Place on an even, solid surface (less
vibration).
Compressor is not
working
Self protect of the compressor
Wait for 3 minute and restart again
after the descend of temperature
Caution: Switch off the unit and unplug it immediately if anything
abnormal happens. Then contact a qualified electrician.
GAF Control (Sale) Pty Ltd
441 Kororoit Creek Road (Po Box 19)
Altona Vic 3018
Tel: 1300 659 489

Related product manuals