Pyle Pro PCA1 - Features and Controls Overview; Power ON LED Indicator; Master Volume Control; RCA Line Input

Features and controls
VOLTAGE
PYLEPRO
e
POWER PEAT stereo Power Amplifier
1. Power ON LED Indicator
-Lights to indicate power is turned on.
2. Master Volume Control
-Lets you adjust the overall sound level.
3.RCA Cable L/R LINE Input
-Lets you to connect the desired LINE input source.
4. PUSH TYPE SPEAKER L/R TERMINALS
-Lets you easily connect speaker wires directly to the
Amplifier.
5.Voltage Selector
-Lets you select the voltage of AC power input source. The
amplifier has selectable input voltage from 110V/60Hz
which is the standard in USA and CANADA. You can also
switch the input voltage to 230V/50Hz for EUROPEAN
operation. Please make sure the switch is in the proper
position before operating, otherwise severe damage will
result not cover by the warrnaty. Please also replace the
fuse with proper rating in this situation (see the next
instruction for the fuse rating).
6. Fuse
-The amplifier uses a fuse for protection against surges
and shor circuit. If the amplifier suddenly turns off and will
not turn on, check the fuse, If necessary, replace it with a
1-amp, 250-volt, fast-acting, 5 x 20mm fuse (not supplied).
1
FUSE