Pyle Pro PT-2400 User Manual

PT-2400 Amplifier
PT-2800 Amplifier
Owner’s Manual
PYE PRO AMPLIFIERS
warranty registration card
Thank you for purchasing this PYLE
product. To activate your
warranty, please mail this card
within 10 days.
Name Address City, State ZIP
Model No. Serial #
(if available)
Date of Purchase
Purchased at:
Music Products Store
Catalog Merchandiser
Sound Contractor/Installer Mail Order
Other
Please complete warranty card, detach and return
All PYLE PRO products are carefully constructed and tested before
shipment. Units purchased in the USA are warranted to be free of
defects in material and workmanship for two (2) years from the date
of purchase. This warranty is limited to the original retail purchaser
of the amplifier.
Should the unit fail due to factory defects in material or workmanship,
your unit will be repaired or replaced at the sole discretion of PYLE.
To obtain warranty service, you must first call our Consumer Return
Hotline at (718) 236-6948 to obtain a Return Authorization Number.
This R.A. # must appear on the outside of your package and on all
paperwork relating to your return.
When returning the unit to us for warranty service, it must be carefully
packed and shipped, prepaid, to:
R.A.#: _____________
PYLE PRO Service Center
1600 63rd Street
Brooklyn, NY 11204
You must also include the following items with your return:
• A copy of your sales receipt or other proof of purchase
• A brief letter, indicating the problem you are experiencing
with the product
• Include in your letter your return address, daytime phone
number and R.A. number
• Also include a check or money order for $15.00 for return
shipping, handling and insurance, or provide your Visa/MC
number with expiration date.
Our obligation under this warranty is limited to the repair or replacement
of the defective unit when it is returned to us prepaid. This warranty
will be considered void if the unit was tampered with, improperly
serviced or subject to misuse, neglect or accidental damage.
Limited Warranty
www.pyleaudio.com

Pyle Pro PT-2400 Specifications

General

Channels	2
Impedance	4-8 Ohms
Frequency Response	20Hz-20kHz
Signal to Noise Ratio	>95dB
THD	<0.1%
Output Connectors	Binding Posts, Speakon
Cooling	Fan Cooled
Power Output	2400W
Input	XLR
Output	Speakon
Input Sensitivity	0.775V
Power Supply	120/240V
Input Connectors	XLR
Dimensions	19'' x 12.2'' x 3.5''

Summary

Limited Warranty

Obtaining Warranty Service

Procedure for obtaining warranty service, including R.A. numbers and required documentation for returns.

Warranty Limitations

Warranty is limited to repair/replacement and void if unit is tampered with, misused, or accidentally damaged.

Pyle Pro Amplifier Features and Controls

Front Panel Overview

Description of front panel components including power meters, level controls, and headphone jack.

Rear Panel Connections and Features

Details on rear panel inputs, outputs, speaker terminals, and other operational features.

Protection and Clip Circuitry

Explanation of amplifier protection circuits and indicators for overload or excessive heat.

Installation and Operation Guidelines

Input and Speaker Connections

Guides for connecting various audio sources and speaker systems to the amplifier.

Bridge Mode Operation

Instructions for operating the amplifier in mono bridged output mode.

Headphone Usage

Guidance on using the headphone jack for private listening or monitoring.

Powering On and Level Adjustment

Step-by-step instructions for safely turning on the amplifier and adjusting output levels.

Speaker Selector Switch

How to use the A/B speaker selector switch for different speaker configurations.

Amplifier Maintenance and Fuse Replacement

Tips for caring for the amplifier and procedures for replacing the fuse.

Amplifier Technical Specifications

Output Power Ratings

Detailed specifications for continuous and maximum output power in stereo and bridged modes.

Frequency Response and Sensitivity

Technical data on frequency response range and input sensitivity for rated output.

Impedance and Power Requirements

Information on speaker impedance compatibility and required AC power voltage/frequency.

Physical Dimensions and Weight

Specifications for the amplifier's physical size and weight.