Need help?Do you have a question about the Pyle Pro PPA200 and is the answer not in the manual?
General| Power Output | 200 Watts |
|---|---|
| Channels | 2 |
| Frequency Response | 20 Hz - 20 kHz |
| Total Harmonic Distortion | < 0.5% |
| Signal to Noise Ratio | > 90 dB |
| Output Impedance | 4 - 8 Ohms |
| Weight | 10 lbs |
| Input | RCA |
| Output | Binding Post |
Details the front panel controls including Power, Output Level, and Fan Cooling.
Explains the function of the Channel 1 and Channel 2 power LED indicators.
Describes the protection circuit indicator and its operational meanings.
Covers connecting the grounding terminal and various audio input sources.
Explains how to select stereo, mono, or bridged mode for input signals.
Instructions for connecting speakers to the amplifier, including impedance.
Specifics for connecting speakers in bridged mono output mode.
Details connecting to AC power and standard rack mounting.
Covers turning the amplifier on, using LED meters, and adjusting output levels.
Explains the function of the internal protect circuitry and clip indicator.
To Next Page
