Need help?Do you have a question about the Pyle Pro PT-600A and is the answer not in the manual?
Power| minimum RMS power output per channel | 50 watts |
|---|---|
| total harmonic distortion | less than 0.05% at 1/2 rated RMS power output |
| power voltage | 220V ~ 50Hz |
| power voltage for U.K. | 240V ~ 50Hz |
| power voltage for U.S.A & Canada | 110V ~ 60 Hz |
| power consumption | 300 Watts maximum |
Audio Specifications| load impedance | 6 ohms |
|---|---|
| frequency response | 20 to 20 kHz, + 1 dB, -2dB |
| RIAA curve deviation | +0.5 dB, -0.5 dB |
| input sensitivity and impedance for PHONO | 2.5mV/47 kohms |
| input sensitivity and impedance for TUNER, TAPE PLAY | 250 mV/47 kohms |
| output level for TAPE REC | 250 mV into 47kohms |
| signal to noise ratio for PHONO | 60 dB |
| signal to noise ratio for TUNER, TAPE PLAY | 70 dB |
Weight and Dimensions| dimensions | 420 x 135 x 230mm (W x H x D) |
|---|---|
| weight | 6.2 Kg |
To Next Page
