Need help?Do you have a question about the Pyle Pro P1001AT and is the answer not in the manual?
General| Type | Power Amplifier |
|---|---|
| Power Output | 1000W |
| Impedance | 4 Ohms |
| Frequency Response | 20 Hz - 20 kHz |
| Input Sensitivity | 0.775V |
| Input Impedance | 20k Ohms |
| Power Supply | AC 115V/230V |
Connect the unit to a power supply of AC~110/60Hz or AC~220V/50Hz.
Never permit children to insert metal objects into the unit to avoid electric shock.
Never remove the enclosure to avoid the risk of a serious electric shock.
Immediately turn off and unplug if an abnormal smell or smoke is detected.
Press to switch the unit's power ON or OFF.
Adjusts the overall audio output volume.
Adjusts the overall volume level for the microphone.
Connect microphones for karaoke function.
Connect your speaker systems to these terminals.
Select between 110V or 220V power input.
Ensure connections are secure and volume is at minimum before powering on.
Use speakers of the same wattage/impedance to prevent unit damage.
To Next Page
