Pyle Pro PTA1000 - Specifications; Input Specifications; Output Specifications

SPECIFICATIONS
PTA 1000 PTA 1400
1. INPUT SPECIFICATIONS:
ĆInput characteristics:
Input impedance balance. 20K ohms
Non-balance ................10K ohms
Input level ...................... +4 dB
ĆPower Input:
Input voltage ........115/230 V (AC)
Frequency ................. 50/60 Hz
2. OUTPUT SPECIFICATIONS:
ĆFrequency response:
+0, -0.2 dB..20K Hz
ĆPower (each channel):
8 OHM .............. 2 x 250 Watts
4 OHM .............. 2 x 500 Watts
1000 Watts Total Power
1. INPUT SPECIFICATIONS:
ĆInput characteristics:
Input impedance balance. 20K ohms
Non-balance .................10K ohms
Input level ....................... +4 dB
ĆPower Input:
Input voltage ........ 115/230 V (AC)
Frequency .................. 50/60 Hz
2. OUTPUT SPECIFICATIONS:
ĆFrequency response:
+0, -0.2 dB..20K Hz
ĆPower (each channel):
8 OHM .............. 2 x 350 Watts
4 OHM .............. 2 x 700 Watts
1400 Watts Total Power