To Next Page

To Previous Page

1. USB PORT/SD CARD SLOT: After inserting a USB ash drive / SD Card into the

input terminal, be sure to set the input selector (16) to DIGITAL/LINE/MP3/BT, then

press the mode button to choose between audio from the USB port, SD Card

input, Line, Optical, Coaxial, Bluetooth or FM radio.

2. LED DISPLAY SCREEN: To display the input sources and track time information

3. CONTROL BUTTONS

A. MODE BUTTON: Press this button to select one of play mode with USB/SD

mode, FM mode and Bluetooth mode, Optical mode, Coaxial Mode, automatically

set in Bluetooth mode after turn on the unit.

STEPS FOR CONNECTING WITH WIRELESS BT DEVICE

1. Press MODE button to choose Bluetooth mode, display BLUE on the screen.

2. Search on the Bluetooth device name from others Bluetooth device and you can

and the Bluetooth name – PDA4BU.

3. Select the PDA4BU Bluetooth name and wait for the device to pair.

4. The PDA4BU will emit a noise coming that the devices have successfully paired

5. Once paired you can play music from your Bluetooth device. You can also use the

control buttons on the unit to select the tracks from your Bluetooth device.

B. REPEAT BUTTON: This button allows you to play the music in repeat mode

(All or Single mode)

ALL - All tracks in the USB or SD CARD will be repeated in order without

interruption.

SINGLE - Repeat the track that was current playing.

C. PREV BUTTON: Use this button to select each of function depending on these

three dierent modes as below.

• In USB/SD mode, use to select previous track.

• In FM/BT mode, use to select previous channel.

• In FM/BT mode, hold this button will decrease the volume.

D. NEXT BUTTON: Use this button to select each of function depending on these

three dierent modes as below.

• In USB/SD mode, use to select next track or folder,.

• In FM/BT mode, use to select next channel.

Pyle PDA4BU User Manual

Questions and Answers: