Pyle PDA9HBU - Front and Back Panel Layout; USB;SD;BT;FM Control Console; Wireless BT Device Pairing

www.PyleUSA.com
6
FRONT & BACK PANEL
1. USB/SD Card/Wireless BT Control Console
After inserting a USB ash drive/SD Card into the input terminal, be sure to set the
input selector (11) to MP3/BT, then press the mode button to choose between
audio from the USB port, SD Card input, Wireless BT or FM radio. If you want to
use the Wireless BT, check the below steps.
STEPS FOR CONNECTING WITH WIRELESS BT DEVICE
A. Press MODE button under the ID3 display screen and enter into BT mode.
B. Search for the wireless BT device and nd the BT name “PDA9HBU”
C. Select the PDA9HBU BT name and wait for the device to pair. The screen will
display “SEARCHING”.
D. The PDA6BU will make a sound conrming that the devices have successfully
paired and screen will display “BT CONNECTED”
E. Once paired you can play music from your wireless BT device. You can also use the
control buttons on the unit to select the tracks from your BT device.