Pyle PHUD19 User Manual

www.PyleUSA.com
5
Setting Functions
• Language Set: Please choose your familiar language (EN-English, CN-Simplied
Chinese, TW-Traditional Chinese)
• Sound Switch: Turn ON/OFF the buzzer
• Speed Alarm: Default value is 150
(the default value can be changed, push left to decrease, push right to increase)
• BAT Alarm: Default setting is OFF, turn right the setting button to open the BAT
Alarm and set the default alarm value.
• Speed Adjust: Adjust the speed according to the dashboard, default value is
107%
• Speed Oset: When the vehicle turns OFF, but the device speed is not 0, then
adjust the device Speed Oset value, If the device speed shows 5MPH, then
change the device Speed Oset default value at 5
• BAT Adjust: If the battery voltage is dierent with the vehicle, it can be adjusted.
• Change Color 1: Default color is white (top speed part in default interface)
• Change Color 2: Default color is red (left part in default interface)
• Change Color 3: Default color is green (right part in default interface)
• Brightness: Default is Auto, means Auto brightness adjustment.
• 1-Darkest
• 2 to 8, the brightness will increase
• 8 is the most bright.
• Speed Unit: Default is Mile, can be change to KM
• Power OFF Time: Default power o time is 180s, for Auto start and stop cars,
please make the power o time to 180-240s
• Sleep Voltage: Default is OFF, if the device can’t auto shut o, please adjust the
voltage at 13.2V or higher
• Time Adjust: When the device searched the satellite successfully, adjust the
device time as your local time and exit.
• Factory Set: Short press IN to reset in factory settings

Pyle PHUD19 Specifications

General

Brand	Pyle
Model	PHUD19
Category	Automobile Accessories
Language	English