Pyle PLDVRCAM74 User Manual

ww w.PyleUSA.com
11
PLATE NUMBER
Enable this feature to enter your vehicle plate number for video recording.
The plate number will stamp in the video.
1. Press MENU once to enter Video Settings
2. Press the UP or DOWN button to navigate to the "Plate Number"
option
3. Press OK to view the current ON/OFF status for this feature
4. Press the UP or DOWN button and OK to enable or disable this feature
5. If "ON" is selected, enter the plate number on the next pop-up screen
using the UP and DOWN buttons; press OK to next digit.
6. Press MENU to exit Video Settings
GRAVITY SENSING
Recommend Setting: Low
This feature acts as an accelerometer, measuring physical and gravitational
forces acting on the camera itself. In the event that such forces are
detected, the device will perform an automatic le lock. (Locked video
les cannot be erased during Loop Recording; they remain on the
memory card until manually deleted or the card is reformatted.)
We recommend that you use the "Low" setting for this feature.
1. Press MENU once to enter Video Settings
2. Press the UP or DOWN button to navigate to the "Gravity Sensing"
option
3. Press OK to view the current selection: Low/Medum/High/OFF
4. Press the UP or DOWN button to make your selection
5. Press OK to conrm your entry
6. Press MENU to exit Video Settings

Pyle PLDVRCAM74 Specifications

General

Brand	Pyle
Model	PLDVRCAM74
Category	Dash Cameras
Language	English