ww w.PyleUSA.com
7
VIDEO SETTINGS
Resolution
Recommend setting: 1080FHD
Use the following procedure to set the recording resolution:
1. Press MENU once to enter Video Settings
2. Press the UP or DOWN button to navigate to the "Resolution" option
3. Press OK to view available resolutions:
1080FD/1920x1080, 720P/1280x720, etc.
4. Press the UP or DOWN button to make your selection
5. Press OK to conrm your entry
6. Press MENU to exit Video Settings
7. Press OK to start recording
8. Press OK again to stop recording
LOOP RECORDING
Recommend Setting: 3 Minutes
With Loop Recording Mode enabled, the device will continuously erase
older video as it records new video, keeping only the images captured
over a user-selected time range. All video older than this range will be
replaced with new video.
Note: Any locked video les on the memory card will remain protected,
and will not be automatically deleted during Loop Recording.
It is recommended that you reformat a memory card after every time
that images are transferred to a computer, or at least once a month.
This keeps important elements of data and le structure clean, helping
to prevent error messages and missing images.
To Next Page
Loading...
Need help?
General
