Pyle PLDVRCAM74 User Manual

ww w.PyleUSA.com
15
Alternatively, you can use a hot key shortcut for this feature. During
Recording Mode, press and hold OK to turn the LCD screen on or o.
Restore Default Factory Settings
Performing this operation will reset all of your device's settings to their
original values. Note: any user-customized settings will be lost.
1. Press MENU twice to enter System Settings
2. Press the UP or DOWN button to navigate to the "Default Settings"
option
3. Press OK to view YES / NO conrmation for this operation
4. Press the UP or DOWN button to make your selection
5. Press OK to conrm your entry
6. Press MENU to exit System Settings
Playback Mode
You can play back recorded video on your device using the following
steps:
1. Press REC to stop recording
2. Press MODE twice to switch from Recording to Playback Mode
3. Press and hold the UP or DOWN button to navigate through the
stored video les.
4. Press OK to start playback for the selected video
5. Press OK again to pause playback
6. Press MODE to stop playback
7. FAST FORWARD: While video is playing, press the UP button one or
more times to set fast playback speed (2X/4X/8X)
8. FAST REWIND: While video is playing, press the DOWN button one or
more times to set reverse playback speed (-2X/-4X/-8X)

Pyle PLDVRCAM74 Specifications

General

Brand	Pyle
Model	PLDVRCAM74
Category	Dash Cameras
Language	English