Pyle PLDVRCAM74 User Manual

ww w.PyleUSA.com
17
Capture Mode
With this feature you can set a timer for automatically capturing images.
1. Press MODE once to enter Photo Mode
2. Press MENU once to enter Photo Settings
3. Press the UP or DOWN button to navigate to the "Capture Mode"
option
4. Press OK to view the current selection: 2SEC/5SEC/10SEC
5. Press the UP or DOWN button to make your selection
6. Press OK to conrm your entry
7. Press MENU to exit Photo Settings
8. Press OK to start the timer
Sequence Mode
This feature allows you to capture a sequence of 3 quick photos with
one button press.
1. Press MODE once to enter Photo Mode
2. Press MENU once to enter Photo Settings
3. Press the UP or DOWN button to navigate to the "Sequence" option
4. Press OK to view the current ON/OFF status for this feature
5. Press the UP or DOWN button to enable or disable this feature
6. Press OK to conrm your entry
7. Press MENU to exit Photo Settings
8. Press OK once to capture a 3-photo sequence
Quality
This option allows you to set the quality level of captured images.
(Lower quality images take up less space on the memory card.)
1. Press MODE once to enter Photo Mode
2. Press MENU once to enter Photo Settings
3. Press the UP or DOWN button to navigate to the "Quality" option

Pyle PLDVRCAM74 Specifications

General

Brand	Pyle
Model	PLDVRCAM74
Category	Dash Cameras
Language	English