Pyle PLDVRCAM74 User Manual

ww w.PyleUSA.com
20
Exposure
This setting allows you to adjust the brightness level of captured images.
The "+0.0" setting is recommended.
1. Press MODE once to enter Photo Mode
2. Press MENU once to enter Photo Settings
3. Press the UP or DOWN button to navigate to the "Color" option
4. Press OK to view the current selection: +0.0, +1/3, -1/3, etc.
5. Press the UP or DOWN button to make your selection
6. Press OK to conrm your entry
7. Press MENU to exit Photo Settings
8. Press OK to capture an image
Anti-Shaking
This feature enables the image stabilizer function to reduce blurring
of captured images.
1. Press MODE once to enter Photo Mode
2. Press MENU once to enter Photo Settings
3. Press the UP or DOWN button to navigate to the "Anti-Shaking"
option
4. Press OK to view the current ON/OFF status for this feature
5. Press the UP or DOWN button to enable or disable this feature
6. Press OK to conrm your entry
7. Press MENU to exit Photo Settings
8. Press OK to capture an image
Quick Review
Enabling this feature will allow you to immediately view each
captured image for a few seconds before taking the next photo.
1. Press MODE once to enter Photo Mode
2. Press MENU once to enter Photo Settings
3. Press the UP or DOWN button to navigate to the "Quick Review" option
4. Press OK to view the current selection: OFF/2SEC/5SEC

Pyle PLDVRCAM74 Specifications

General

Brand	Pyle
Model	PLDVRCAM74
Category	Dash Cameras
Language	English