www.PyleUSA.com www.PyleUSA.com
8 9
Settings and Configuration
SYSTEM
Language English, French, Chinese, Italian, Spanish, Portuguese, Deutsch
OSD Duration Never, 5, 10, 30 & 60 seconds
Video Output AV, OFF
Reset Rest System & Settings
PLAYER
TV System PAL, NTSC, AUTO
Screen Save ON / OFF
Aspect Ratio 4:3LB, 4:3PS, 16:9
Password (Default 0000)
Resume ON/OFF
Audio Language Selectable
Subtitle Language Selectable
Menu Language Selectable
*Please note: state1, state2, state3 and state4 allow the monitor‘s display screen
to rotate and flip. To accommodate for rear view and backup camera system
compatibility, the settings menu also rotates and flips -- this may result in
difficulty of reading the menu settings text. To assist in reading the menu
settings text, revert the ROTATE setting selection back to 'state3' and resume
configuring your settings.
*Change the TV System settings to adjust the DVD output format of your media disc.
Power ON/OFF
Press and hold the Power button to turn ON/OFF the unit
Monitor Source Selection
Press the Power button to switch between the (4) source input selection modes.
• Disc, AV1, AV2, HDMI
CD/DVD System Operation
Insert a CD/DVD -- with the label facing the back of the PLRD146.The contents
will automatically play upon insertion.
MP3 Playback
Insert a USB Flash or SD Memory Card and your media will automatically play.
Installation (Professional Installation Recommended)
Product Installation & Housing Changing Operation
1. Turn over the machine, and take down the metal support bracket carefully.
2. Tighten the metal support bracket to the ceiling of vehicle as showed in the
second picture, and leave a certain space to let the connecting wire pass
through. (Take extra care to avoid damage)
3. To install the unit to the metal support bracket, connecting with the unit and
the wires passing through the space remained. (Take care to tidy up the wires
to avoid pressing Multimedia chipset. And install special screws to avoid loose.)
NOTICE: If you need to change the housing, please do it before installing the
machine in the car.
Chip installed inside products is composed by mechanism and electronic
sub-assembly, be careful when installing and pay attention to be pressured.
4. Installing and changing Interchangeable skin
You can change dierent colors of the
interchangeable housings easily by opening the
original housings with a small release key provided
in the package.
Connection Diagram
Without audio & video input or audio & video output, the wire of input & output
does not need to be connected.
To Next Page
Loading...
