2
Thanks for choosing this tripod stand for TV/monitor and other displayer.
Before you start to assemble this with your device please check the mounting holes are correct and the
size of the monitor and the weight of the monitor is correct
Normally for assembling this stand with your TV/Monitor, it is better to have two persons as some TV/
Monitor is heavy or big
The stand itself has been already assembled so you only need mount panel with the monitor or TV, so
when you the box you will a complete stand with some hardware for mounting the panel to the TV or
monitor
You can place down the stand and mount the panel with the back of your TV/Monitor, you need choose
the right bolts and right hole distance to match the VESA holes of the TV/Monitor, then just stand up
this tripod. Expand the legs as wider as you can to be stable. Adjust knob in the middle to the height you
need. Adjust the angle via the knob in the top to the better view angle you need and tighten it. You can
also turn the monitor left right a little if you need
When you move the stand, it is better hold the TV rstly to be safe. You can also use it to mount other
device if you want
To Next Page
Loading...
Need help?
General
