How to use a wired
Just plug the microphone to the wired mic input jack,
you hear your voice immediately.
How to adjust ttie
q
VOlum',.wntroliJ
~~~'"
-
-=J
' .
You
may turn the Tone knob to its best position for your satisfactory.
Audio output will go to the recording
system and you can record while
using the amplifier system.
How to use the
Aux
Connect the cable
of
the CD/MD etc into
theAux
Input Jack to get the music sound amplifying.
Adjust the volume depend on your requirement.
How
to
adjust
the
volume
Wrreless receIVIng
\,-------
Input music
volume
control
r-"--=--"~~+-ti>,.
-f·~=_
~
lI=.
'0=-
=;--®
CDIMDIETC
The speaker volume control will adjust the amplifier volume to its best sound level.
How
to
use
the
multiply'
In
order to multiply volume, a or two wireless microphones with several wireless
amplifiers
of
the same frequency can be applied to receive simultaneously
in
circumstances
of
large hall or stadium for hundreds
or
thousands
of
persons.
How
to
charge
the
9V
batte~?
Open the battery compartment on the back
of
the system case.
Make sure you have right polarity to put the battery into the compartment.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
