Page 32
Contact SegenSolar (PTY) Ltd | e: info@segensolar.co.za | t: 08780 20663
Configuration-Victron
1. When connected to the
battery, the color control
can automatically identify
“Pylontech”
2. Go to settings,
open “DVCC”
4. Go to settings, open “ESS”
5. Choose suitable
operation “mode”
6. If you choose
“Optimized”, please set
minimum SOC at 10%
or 5%.
7. Connect inverter
to host computer
3. Switch on “DVCC”
8. The host computer (VE
configure) settings can be
referred at
Victron website:
https://www.victronenergy.com
/live/battery_compatibility:pylo
ntech_phantom
To Next Page
Loading...
