© 2000 Directed Electronics, Inc. Vista, CA 29
optional vehicle recovery system (VRS
®
)
No additional parts are required to add the optional VRS
®
feature. However for the VRS
®
feature to be effective,
the 8618 Starter Kill Relay must be installed. The VRS
®
feature can be activated with the remote transmitter and
deactivated with the valet switch. If the VRS
®
option is selected it is recommended to program the Valet switch
to respond to more than one pulse for maximum security. (See System Features Learn Routine section.)
1. Turn the ignition to the ON position.
2. Press on the transmitter for 1 second.
The parking light will flash once and the siren will chirp once to confirm that the VRS system is armed and will
enter the trigger sequence next time a door is opened and then closed.
To disarm VRS (before siren begins chirping):
1. Turn the ignition to the ON position.
2. Press on the transmitter for 1 second.
The parking lights will flash twice and the siren will chirp twice to confirm that the VRS
®
system is disarmed.
To disarm VRS (after the siren has begun chirping):
1. Turn the ignition to the ON position.
2. Press and release the Valet
®
/Program switch the selected number of times programmed in
Step 2-5. (See System Features Learn Routine section of this guide.)
NOTE: For a detailed explanation to the VRS triggered sequence, refer to the Vehicle Recovery
System section of the Owner's Guide.
to disarm the VRS
to arm the VRS
To Next Page
Loading...
Need help?
General
