To Next Page

To Previous Page

primary harness (H1), 12-pin connector

______

This guide describes in detail the connection of each wire. Also included are possible applications of each wire.

This system was designed with the ultimate in flexibility and security in mind. Many of the wires have more than

one possible function. Please read the instructions carefully to ensure a thorough understanding of this unit and

how it operates.

H1/1 ORANGE (-) GROUND-WHEN-ARMED OUTPUT

This wire supplies a (-) ground as long as the system is armed. This output ceases as soon as the system is dis-

armed. The orange wire is pre-wired to control the p/n 8618 starter kill relay. It can supply up to 500 mA of

current.

NOTE: If connecting the orange wire to control another module, such as a p/n 529T or p/n 530T

window module, a 1 amp diode (type 1N4004) will be required. (See the following diagram.)

IMPORTANT! Never interrupt any wire other than the starter wire.

primary harness wiring guide

RED/WHITE (-) 200 mA CHANNEL 2 OUTPUT

RED (+) CONSTANT POWER INPUT

BROWN (+) SIREN OUTPUT

YELLOW (+) SWITCHED IGNITION INPUT, ZONE 5

BLACK (-) CHASSIS GROUND INPUT

VIOLET (+) DOOR TRIGGER INPUT, ZONE 3

BLUE (-) INSTANT TRIGGER INPUT, ZONE 1

GREEN (-) DOOR TRIGGER INPUT, ZONE 3

BLACK/WHITE (-) 200 mA DOMELIGHT SUPERVISION OUTPUT

WHITE/BLUE (-) 200 mA CHANNEL 3 PROGRAMMABLE OUTPUT

WHITE (+)/(-) SELECTABLE LIGHT FLASH OUTPUT

ORANGE (-) 500 mA ARMED OUTPUT

H1/1

H1/2

H1/3

H1/4

H1/5

H1/6

H1/7

H1/8

H1/9

H1/10

H1/11

H1/12

primary harness wiring diagram

Python 650 ESP User Manual

Questions and Answers: