4
© 2011 Directed Electronics. All rights reserved.
Using Your System
Locking
Press for one second to lock the system (if the door locks are con-
nected). The horn honks (if connected) and the parking lights flash once
to confirm locking of the system. The optional Failsafe
®
Starter Kill also
activates and prevents the vehicle’s starter from cranking.
Unlocking
Press for one second unlocks the doors (if connected). The horn
honks twice (if connected) and the parking lights flash twice to confirm
unlocking of the system. The optional Failsafe Starter Kill is deactivated.
Disabling (optional) starter kill
If your remote control is lost or damaged, you can manually override
the starter kill. To do this, you must have the ve hi cle's ignition key and
know where the Valet button is located. Be sure to check with the in-
staller for the location of the Valet button.
To override the starter kill, turn the ignition on and press and release the
Valet button within 10 seconds. The vehicle should start. If it does not
start, you may have waited too long; turn the ignition off and repeat
the process.
Location of Valet button:
____________________
To Next Page
Loading...
Need help?
General
