EasyManuals Logo

Python 7142P User Manual

Python 7142P
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
6
© 2011 Directed Electronics. All rights reserved.
When you are ready to drive the vehicle:
1. Insert the ignition key and turn it to the ON (not the START)
po sition.
2. Press the brake pedal. The remote start system shuts down and the
motor continues to run because the ignition has been turned on.
Note:
If the brake pedal is pressed before the key is in the ON position,
the engine will shut down.
While the vehicle is running during remote start operation, the system
monitors the ve hi cle and automatically shuts down the engine if it receives
any of the following shut-down inputs:
s The brake pedal is pressed.
s The hood is opened.
s The shutdown toggle switch is put into the OFF position.
s The pre-programmed run time (12, 24, or 60 minutes) has elapsed.
s Remote control button
is pressed.
Rear defogger
To turn the rear defogger On:
1. Simultaneously press & release the + +AUX buttons on
the remote control.
2. The lights flash 3 times.
3. The rear defogger activates when the vehicle is remote started.
Note:
If the remote start is On the lights turn Off then flash 3-times be-
fore returning to normal, and the defogger activates as programmed.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Python 7142P and is the answer not in the manual?

Python 7142P Specifications

General IconGeneral
BrandPython
Model7142P
CategoryRemote Control
LanguageEnglish

Related product manuals