Need help?Do you have a question about the Qardio QardioBase X and is the answer not in the manual?
General| Product Name | QardioBase X |
|---|---|
| Category | Personal Care Products |
| Type | Smart Scale |
| Weight Increment | 0.2 lbs (0.1 kg) |
| Connectivity | Wi-Fi, Bluetooth |
| Body Composition Analysis | Yes |
| Display | LED |
| User Recognition | Yes |
| Battery Life | Up to 12 months |
| Weight Capacity | 180 kg |
| Measurement Range | 180 kg |
| Measurement Units | lbs, kg |
| Battery Type | AAA |
| Compatibility | iOS, Android |
| Color | White |
QardioBase X measures weight and estimates body composition using BIA; not for medical diagnosis.
Read manual, avoid wet/slippery surfaces, do not use with medical devices or if pregnant without mode selection.
Do not use with dialysis, edema, osteoporosis, dysmorphia, or elevated temperature.
Avoid standing on edges, prolonged standing, heat sources, humidity, overloading, and water.
Risk of explosion if battery is replaced incorrectly or disposed of improperly.
Requires iOS 12.0+, Kindle, Android 6+, Bluetooth 4.0, and Qardio app installation.
Supports 2.4 GHz Wi-Fi (b/g/n) with WPA/WPA2; not compatible with 5GHz networks.
Press activation button and move switch to turn on the scale for initial activation.
Download the Qardio App, create an account, and follow setup instructions to associate the scale.
Connect QardioBase X to Wi-Fi using network name (SSID) and WPA/WPA2 password.
Step on scale for calibration, then step on again to measure weight and body fat.
Measures weight only, disabling body composition. Use if you have a pacemaker or similar medical device.
Tracks weight progress during pregnancy and postpartum without body composition analysis.
Step on scale with bare feet, stand still, ensure dry feet and surface for accurate results.
Position heels correctly, ensure feet and scale are dry. Toes may overhang platform.
Accurate profile data (height, age, sex) is required for BMI and body composition measurements.
Always step on with dry feet and ensure the scale surface is not wet for safety and accuracy.
Set weight units (Kg, Lb, St) via the Qardio App settings menu on Android devices.
Set goal weight in the Qardio App by sliding the indicator to track progress.
Use flat, hard surface. Stand parallel, weight balanced. Ensure dry feet and scale surface.
Measure daily at same time. Measure undressed, before eating/showering, after voiding bladder.
Avoid alcohol, caffeine, intense sport before measuring for accurate results.
Avoid heavy meals or dehydration. Ensure profile data is accurate for reliable measurements.
Do not use the QardioBase X while it is charging.
Check battery level. Connect to charger if low. Contact support if issue persists.
Ensure signal is strong, move closer to router. Check password accuracy and reset router if needed.
Stand still on the scale. Movement may trigger 'Hold Still' icon for accurate readings.
Ensure dry, bare feet and that 'Normal Mode' is enabled for body composition analysis.
Pregnancy or Weight Only modes disable body analysis. Use these if pregnant or have medical devices.
Ensure QardioBase X is on an uneven or unstable surface. Align round circle with heels.
Water saturation from wet hair or body can skew results. Ensure you are completely dry.
Ensure accurate personal profile data. Avoid measuring after alcohol, caffeine, sport, meals, or dehydration.
Use reset button. Step on to turn on, step off to calibrate, then step on again to measure.
To Next Page