To Next PageTo Next Page
Need help?Do you have a question about the QD Pi HSC505-32 LCD and is the answer not in the manual?
General| Brand | QD |
|---|---|
| Model | Pi HSC505-32 LCD |
| Category | Controller |
| Language | English |
Features users can program via keypad for system customization.
Highlighting the main capabilities and functionalities.
Setting up the QE920 module, bus address, and detectors.
Procedure to add wireless detectors to the QE920 module.
Verifying the operation of the QE920 module and its components.
Comprehensive guide for initial panel and keypad setup.
Procedure to access the installer programming interface.
Overview of the different programming levels and their functions.
Defining zone types and functions within the system.
Configuring zones to bypass automatically during home arming.
Configuring tamper detection for individual zones.
Enabling or disabling bypass functionality for zones.
Selecting auto-arm modes for partitions.
Setting the specific times for automatic arming.
Enabling quick arming and bypassing without user codes.
Configuring the onboard dialer and its settings.
Determining if zones are keypad or expander inputs.
Configuring various reporting codes for system events.
Setting time delays for various trigger events.
Setting the default polarity for trigger outputs.
Assigning functions to buttons on codex remotes.
Mapping system events to Ademco Point ID reporting codes.
Worksheet for zone types, partitions, and home zone settings.
Worksheet for auto-arm modes, timers, and trigger configurations.
Reference for assigning event codes, numbers, and actions to trigger outputs.
