Manual for Advance 6T series
#"RTC Alarm Enabled RTC alarm can be used to generate a wake event
Resume to power up the system which is in power-off
status. You can set any date or any time to
power up the system.
Disabled RTC has no alarm function.
#"Date( of Month ) Sets the date of RTC.
#"Resume Time Sets the resume time of RTC.
#"IRQs Activity Press Enter Reloads global timer.
Monitoring
#"Primary INTR On Allows wake-up from IRQ.
Off Does not allow wake-up from IRQ.
#" IRQ3~IRQ15 Enabled Enables IRQx to wake up.
Disabled Disables IRQx to wake up.
Award BIOS Description
To Next Page
Loading...
