Need help?Do you have a question about the QDI LEGEND-V and is the answer not in the manual?
General| Form Factor | ATX |
|---|---|
| CPU Socket | Socket 7 |
| RAM Type | SDRAM |
| IDE | 2 |
| FDD | 1 |
| Serial Ports | 2 |
| Parallel Port | 1 |
| PS/2 Mouse Port | 1 |
| PS/2 Keyboard Port | 1 |
| RAM Slots | 3x DIMM |
Lists conformity standards for radio disturbance and immunity.
General overview of the Legend-V green mainboard and its features.
Highlights of the Pentium II processors, chipset, and system memory.
Details pin assignments for power switch and power/sleep LED connectors.
Lists pin assignments for Hard Disk LED, Speaker, and Turbo LED connectors.
Describes Hardware Green, Infrared Header, and Fan connectors.
Explains Wake-On-LAN functionality and the chassis security connector.
Describes IDE, UART, USB ports and provides memory configuration rules.
Explains the procedure to clear the CMOS settings using JP6.
Instructions on how to enter the Award BIOS CMOS Setup utility using <Del> or <Ctrl>+<Alt>+<Esc>.
Describes default settings and navigation for Standard CMOS Setup.
Configures video modes and error handling during system power-up.
Shows memory details determined by POST.
Guides setting CPU speed and mode via the SpeedEasy CPU Setup menu.
Configures various BIOS features like virus warning, cache, and boot sequence.
Allows configuration of chipset features like DRAM timing and AGP settings.
Configures power saving features like Doze, Standby, and Suspend modes.
Manages Plug and Play (PnP) and PCI configuration settings, including IRQ and DMA assignments.
Configures integrated peripherals like IDE, floppy, serial, and parallel ports.
Displays system voltages and fan speeds for monitoring.
Allows setting supervisor or user passwords to protect BIOS settings.
Automates the detection of IDE hard disk modes.
Instructions for system recovery if boot fails after CMOS changes.
Recommends caution and reading README before upgrading BIOS.
Step-by-step guide for installing the processor retention mechanism.
Instructions for installing the heatsink support base and the processor.
Information on the default boot logo and how to replace it using utility software.
To Next Page
