Connector Configuration
2 - 4
+ FAN POSI.
S FAN SPEED
Note: These two fans are set as “ON “ as default.
Standard Fan Connector (CHSFAN)
PIN NAME FUNCTION
- FAN NEGA.
+ FAN POSI.
S FAN SPEED
Wake-Up ON LAN (WOL2)
PIN NUMBER FUNCTION
1 +5V Standby
2 GND
3 Signal for waking up
Note: This header is to be connected to a LAN adapter for wake-up on
LAN. Please set “Resume by LAN/Ring” to Enable at the “POWER
MANAGERMENT SETUP” of CMOS SETUP first, if Wake-Up on LAN
function to be used.
Chassis Security (J30):
Opened if chassis is closed.
Closed if chassis is opened.
Note: This header is optional.
I/O Port
Description
CONNECTOR FUNCTION
To Next Page
Loading...
Need help?
General
