LCDWIKI MSP0962_MSP0963 Specification CR2023-MI2973
www.lcdwiki.com 12 / 12 V1.0
Analysis:
The backlight circuit of this module is driven by a transistor. The LED pin
inputs a high level to light up the backlight, and a low level to turn off the
backlight. The PWM signal can also be input through the LED pin to achieve
dimming purposes; If the LED pin is suspended without any treatment, an
unstable state will occur, which means that the LED pin will be very dark when
touched by hand. It is necessary to configure the LED pin with a stable level
output to ensure stable and normal backlight.
Question 4: What if there is no example in the demo that my
microcontroller is suitable for
Analysis:
As is well known, there are over ten thousand types of microcontroller
models, and the development boards derived from them are countless. Our
demo is configured with examples of the
ESP32/STM32/CH32/C51/AruinoUNO/RaspberryPi platform by default, and
each example will only be released after being tested and certified. All source
code is free and open-source learning, and is mostly written in pure C language,
making it convenient for customers to transplant to their own microcontroller
platform; If you cannot find a directly usable example in the demo, you need to
refer to our code and transplant it yourself. If necessary, you can also purchase
our test board to test the screen first to determine its quality and increase
confidence; Our company provides low-level driver technical support. Welcome
to communicate, exchange, and learn!
To Previous Page
Loading...